When sewage backs up in a Howard Lake property, the cleanup has to be done correctly from the first step. Incomplete containment, improper material disposal, or skipped sanitization steps leave biological contamination in the structural materials — creating an ongoing health risk long after the visible mess is gone.
📞 Call +1-844-499-0972 — Howard Lake Sewage ResponseSewage cleanup in Howard Lake is not a standard water damage job. The contamination levels, regulated disposal requirements, containment procedures, and sanitization standards that apply to Category 3 events are fundamentally different — and using a company without specific Category 3 training and equipment leaves your property and your household at risk.
IICRC certification is the standard that defines whether a sewage cleanup was done correctly. Our Howard Lake team is certified. The difference is measurable.
Sewage-contaminated materials removed from Howard Lake properties — carpet, pad, drywall, insulation, and any porous material that absorbed Category 3 water — require regulated waste handling and disposal. Our Howard Lake crew bags, labels, and disposes of all contaminated material to applicable MN regulatory requirements. No dumping in standard refuse. No leaving contaminated materials in dumpsters that aren't rated for biohazard waste.
After contaminated material is removed and Category 3 extraction is complete, every structural surface that contacted sewage water receives multiple applications of EPA-registered, hospital-grade antimicrobial and antifungal treatments. The sanitization sequence — spray application, dwell time, surface wipe-down, second application — is protocol-driven, not judgment-call driven. Our Howard Lake crew follows the sequence on every surface, every time.
Sewage cleanup claims in Howard Lake typically proceed under homeowner's policy coverage for drain backup and water damage. Our Howard Lake coordinators are experienced with backup coverage riders and know how to document Category 3 events for claim approval. For commercial properties or clients requiring clearance testing, we coordinate third-party air quality and surface sampling after remediation to provide a written clearance certificate before reconstruction begins.
Here's what our certified Howard Lake Sewage Cleanup crew handles on every job.
Containment is established before extraction begins. This is non-negotiable on every Howard Lake sewage job.
Extracting Category 3 sewage water from a Howard Lake property requires specific PPE — full protective suits, respirators rated for biological hazard, and disposable boots — for every technician in the contamination zone. We use dedicated contaminated-water extraction equipment that is not shared with standard water damage jobs and is properly sanitized between uses. After extraction, all materials that contacted Category 3 water and cannot be decontaminated to a safe standard — carpet, pad, standard drywall, fiberglass insulation, and any non-cleanable surface materials — are removed as regulated waste, bagged in approved containers, and disposed of under MN biohazard material regulations.
After material removal, every remaining structural surface — framing, subfloor sheathing, masonry, concrete, and any hard surface that contacted sewage water in your Howard Lake property — receives a multi-phase sanitization treatment using EPA-registered, hospital-grade antimicrobial and antifungal agents. The sanitization sequence includes spray application, documented dwell time, surface contact, and at minimum one additional application after the first dwell cycle. This is not a one-spray process. The S520 protocol our Howard Lake team follows is designed to address the pathogen load that Category 3 water deposits on structural surfaces.
Odor neutralization is a final treatment step, not a product sprayed at the end to cover incomplete remediation.
Most MN homeowner's policies cover sewage backup events under a backup coverage rider. Our Howard Lake claim coordinators are familiar with the specific documentation that backup claims require — including the distinction between backup events (covered) and sewer line failures (may require separate coverage) — and build your claim file from the first day to match what your carrier's adjuster will look for. We file the claim, coordinate the adjuster visit, and follow the settlement through. You focus on your household; we handle the insurance.
After Category 3 remediation is confirmed complete by instrument readings and — where required — by third-party clearance testing, our licensed Howard Lake reconstruction team rebuilds your property: new drywall, fresh insulation, flooring, paint, trim, and any affected cabinetry or millwork. All reconstruction is performed to the same documentation standard as the remediation phase, providing a complete recovery record from sewage event to finished property that your insurance carrier and any future property transaction will find clear and complete.


Call +1-844-499-0972 and a live Howard Lake dispatcher answers — not a recording. Describe the situation; our dispatcher confirms the sewage backup details, dispatches the nearest Category 3-equipped crew, and confirms estimated arrival. Evacuate the affected area and prevent household members and pets from entering while we're en route.
Our Howard Lake crew arrives in full Category 3 PPE with containment materials, dedicated contaminated-water extraction equipment, and sanitization products. Containment is established before extraction begins — no exceptions. After containment, we identify the source of the backup and coordinate correction if needed before the cleanup scope is assessed.
After initial containment and source control, our Howard Lake project manager assesses the full Category 3 contamination extent, identifies all materials requiring removal, and prepares a written Xactimate-based scope covering extraction, material removal, sanitization, structural drying, and reconstruction. You review the scope and the cost before any material removal or treatment begins. If insurance is involved, the claim is filed the same day.
From sewage event to finished property — documented, guaranteed, and handled by one company.



"We have a young child and a dog and the moment the sewage smell hit I knew this was something I couldn't handle myself. COS Water Damage Restoration's Howard Lake team was there in under 60 minutes, contained the area so our family could stay in the upper floors, and handled every part of the cleanup in a way I trusted. The clearance testing they coordinated at the end gave me documented proof that the remediation was complete."
"The thing that stood out with COS Water Damage Restoration's Howard Lake sewage cleanup team was the containment setup — I've seen other companies skip it or do it loosely, and you can tell they don't understand why it matters. This team had proper negative-pressure containment up before they extracted a gallon of water. The two-phase sanitization after material removal, the hydroxyl generator running during drying, the final surface swab coordination — this was a Category 3 remediation done to the actual standard, not a watered-down version of it."
"I've used general contractors for water damage before with mixed results. After calling COS Water Damage Restoration for a sewage event in Howard Lake, I understand the difference between a certified Category 3 remediation team and a general restoration company that 'also does sewage.' The protocols aren't comparable."
COS Water Damage Restoration's certified Category 3 sewage cleanup team serves Howard Lake and surrounding communities throughout MN. Call +1-844-499-0972 to confirm same-day service at your address.
Sewage contamination requires certified remediation — not a general cleanup crew. Call +1-844-499-0972 and our Howard Lake Category 3 team responds fast, contains the event, and remediates to the standard that protects your household.
📞 Call +1-844-499-0972 — Howard Lake Sewage Response24/7 Response · IICRC S520 Certified · Category 3 Protocols · Howard Lake, MN